 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 150 Watts LPS150 Series Total Power: 110-150 Watts Input Voltage: 85-132 / 170-264 VAC 220-300 VDC # of Outputs: Single Electrical Specs Input Input range 85-132 VAC or 170-264 VAC automatically selected. 220-300 VDC 47-63 Hz 38 A max, cold start @ 25C 75% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted <0.5 mA @ 50/60 Hz, 264 VAC input Frequency Inrush current Efficiency EMI filter Special Features * * * * * * * * * * * * Auto ranging input Remote sense Remote inhibit Power fail Single wire current sharing Built-in EMI filter Low output ripple Adjustable output 135 khz switching frequency Overvoltage protection Overload protection Optional cover (-C suffix). Safety ground leakage current Output Maximum power 110 W convection (75 W with cover) 150 W with 30 CFM forced air (130 W with cover) 5% minimum 20 ms @ 110 W load, 115/230 VAC nominal line Short circuit protection. Case overload protected @ 110% to 145% above peak rating 5 V output: 5.7 to 6.7 VDC. Other outputs 10% to 25% above nominal output TTL Logic signal goes high 50-150 msec after 5 V output. It goes low at least 3 ms before loss of regulation. Requires an external TTL high signal to inhibit outputs. Compensates for 0.5 V lead drop minimum, will operate without remote sense connected. Reverse connection protected. Adjustment range Hold-up time Overload protection Overvoltage protection Environmental Operating temperature: 0 to 50C ambient; derate each output at 2.5% per degree from 50 to 70C Electromagnetic susceptibility: Designed to meet IEC 801, -2, -3, -4, -5,-6, Level 3 Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75 G peak 5 Hz to 500 Hz, operational Storage temperature: -40 to 85C Temperature coefficient: .04% per C MTBF demonstrated: >550,000 hours at full load and 25C ambient conditions Logic Control Power Failure Remote inhibit Remote sense Safety VDE UL CSA NEMKO BABT CB CE 0805/EN60950 (IEC950) UL1950 CSA 22.2-234 Level 3 EN 60950/EMKO-TUE (74-sec) 203 EN60950/BS7002 Certificate and report Mark (LVD) 11774-3336-1260 (LC#88585) EI32002 LR53982 P95102999 607019 2062 112 America's (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 rev 12.01.01 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 LPS150 Series Ordering Information Model Number LPS152 LPS153 LPS155 Output Voltage 5V 12-(15) V 24-(28) V Minimum Load 0A 0A 0A Maximum Load with Convection Cooling 22 A 9.1 A 4.5 A Maximum Load with 30 CFM Forced Air 30 A 12.5 A 6.2 A Peak Load1 35 A 14.5 A 7.2 A Regulation2 Ripple P/P (PARD)3 50 mV 150 mV 280 mV, max. 2% 2% 2% 1. Peak current lasting <30 seconds with a maximum 10% duty cycle. 2. At 25C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 F in parallel with a 0.1 F capacitor at rated line and load ranges. Note: -C suffix added to the model number indicates cover option. Pin Assignments Connector SK1 PIN 1 PIN 2 PIN 3 PIN 4 PIN 5 PIN 6 PIN 7 PIN 8 LPS152 INHIBIT -ve INHIBIT +ve VCC No Connection COMMON -SENSE +SENSE C SHARE LPS153 INHIBIT -ve INHIBIT +ve VCC No Connection COMMON -SENSE +SENSE C SHARE LPS155 INHIBIT -ve INHIBIT +ve VCC No Connection COMMON -SENSE +SENSE C SHARE SK1 8765 SK3 2 1 SK2 765 Do Not Adjust Output Adjust 1234 #6-32 (8 places) .5625 SK2 PIN 5 PIN 6 PIN 7 SK3 TB-1 TB-2 PIN 1 PIN 3 PIN 5 COMMON PIN REMOVED POK COMMON +5 V GROUND LINE NEUTRAL COMMON PIN REMOVED POK COMMON +12 to +15 V GROUND LINE NEUTRAL COMMON PIN REMOVED POK COMMON +24 to +28 V GROUND LINE NEUTRAL 7.4 (188.0) 8.5 (216.0) SK4 Mating Connectors (SK4) AC Input: Molex 09-50-8051 (USA) Molex 09-91-0500 (UK) PINS: 08-58-0111 (SK2) Power fail: Molex 09-50-8031 (USA) Molex 09-91-0300 (UK) PINS: 08-58-0111 (SK1) Remote sense/Remote inhibit: Molex 51110-0851 (USA) Pins: 50394-8100 531 4.25 (108.0) SK4 1.5 (38.1) .75 (19.0) Astec Connector Kit #70-841-009, includes al of the above. Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is .02". 3. Specifications are for convection rating at factory settings unless otherwise stated. 4. Remote inhibit requires an external 5V @ 10mA to activate. 5. Mounting (6-32) maximum insertion depth is 0.12". 6. Warranty: 1 year 7. Weight: 1.75 lb. / 0.80 kg .875 (22.25) 2.5 (63.5) www.astec.com 113 |
Price & Availability of LPS150
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |